Original paper

2012 2011 2010 2009 2008 2007 2006 2005 2004 2003 2002 2001 2000 1999以前

2012

  • H. Toda, F. Tomizato, F. Zeismann, Y. Motoyashiki-Besel, K. Uesugi, A. Takeuchi, Y. Suzuki, M. Kobayashi and A. Bruckner-Foit,High-resolution observation of steel using X-ray tomography Technique,ISIJ Inter.,Vol.52,No.3,2012,517–522

2011

  • H. Toda, S. Masuda, R. Batres, M Kobayashi, S. Aoyama, M. Onodera, R. Furusawa, K. Uesugi, A. Takeuchi, Y. Suzuki, Statistical assessment of fatigue crack initiation from sub-surface hydrogen micropores in high-quality die-cast aluminum, Acta Materialia, Vol. 59, No.12, 4990-4998, 2011
  • 中澤満, 小林正和, 戸田裕之, 青木義満, サブミクロン3D-CT画像を用いた材料内部の変形破壊特性解析の高精度化, 電気学会論文誌D, Vol.131, 548-556, 2011
  • H. Toda, E. Maire, S. Yamauchi, H. Tsuruta, T. Hiramatsu, M. Kobayashi, In situ observation of ductile fracture using X-ray tomography technique, Acta Materialia, Vol. 59, No. 5, 1995-2008, 2011
  • 瀬詰知弘、戸田裕之、小林正和、福永哲也,析出物配向制御による時効析出型アルミニウム合金の熱疲労特性向上,軽金属,Vol.61,No.8,2011,402-403
  • Q. Zhang and H. Toda,Synchrotron K-edge subtraction imaging and its application to metallic foams,Acta Phys. Sinca,Vol.60,No.11,2011,114103
  • H. Toda, K. Uesugi, Y. Suzuki and M. Kobayashi,3D/4D strain mapping using in-situ X-ray microtomography,Appl. Mech. Mater.,Vol. 70,2011,249-254,The 2011 International Conference on Advances in Experimental Mechanics: Integrating Simulation and Experimentation for Validation (ISEV) , The Royal College of Physicians, Edinburgh.
  • H. Toda, A. Miyawaki, K. Uesugi, Y. Suzuki and M. Kobayashi,Localized deformation during fracture of high-strength aluminum alloy,Procedia Engng.,Vol. 10,2011,2598-2603 (CD-ROM),The 11th International Conference on the Mechanical Behavior of Materials (ICM 11), June 5-9, 2011, Lake Como, Italy
  • Q. Zhang and H. Toda,Dual energy K- edge subtraction imaging of 3D inhomogeneous microstructure in highly alloyed aluminium foam,Research Frontiers 2010,2011,64-65

2010

  • M. Kobayashi, Y. Dorce, H. Toda, H. Horikawa, Effect of local volume fraction of microporosity on tensile properties in Al-Si-Mg cast alloy, Materials Science and Technology, Vol. 26, No. 8, 962-967, 2010
  • H. Toda, K. Shimizu, K. Uesugi, Y. Suzuki and M. Kobayashi, Application of dual-energy K-edge subtraction imaging to assessment of heat treatments in Al-Cu Alloys, Materials Transactions, Vol. 51, No.11, 2045-2048, 2010
  • M. Nakazawa, M. Kobayashi, H. Toda and Y. Aoki, Proposal of a method to analyze 3D deformation/fracture characteristics inside materials based on a stratified matching approach, Machine Vision and Applications, Vol. 21, No. 5, 687-694, 2010
  • H. Toda, T. Yamaguchi, M. Nakawaza, Y. Aoki, K. Uesugi, Y. Suzuki and M. Kobayashi, Four-dimensional annihilation behaviors of micro pores during surface cold working, Materials Transactions, Vol. 51, No.7, 1288-1295, 2010
  • Q. Zhang, H. Toda, M. Kobayashi, Y. Suzuki and K. Uesugi, Three dimensional microstructure characterization of an Al-Zn-Mg alloy foam using synchrotron X-ray microtomography, Materials Science Forum, Vols. 654-656, 2358-2361, 2010
  • M. Kobayashi, H.Toda, K.Uesugi, A.Takeuchi and Y.Suzuki, 3D characterisation of grain deformation under synchrotron radiation, Materials Science Forum, Vols. 654-656, 2303-2306, 2010
  • K. Sakamoto, S. Ishimitsu, T. Oda, Y. Sugiyama and H. Toda, Analysis of the relationship between material structures and auditory impressions, ICIC Express Letters, Vol. 4, No. 3, 691-696, 2010
  • Q. Zhang, H. Toda, Y. Takami, Y. Suzuki, K. Uesugi, M. Kobayashi, Assessment of 3D inhomogeneous microstructure of highly alloyed aluminium foam via dual energy K-edge subtraction imaging, Philosophical Magazine, Vol.90, No.14, 1853-1871, 2010
  • H. Toda, T. Nishimura, K. Uesugi, Y. Suzuki, M. Kobayashi, Influence of high-temperature solution treatments on mechanical properties of an Al-Si-Cu aluminum alloy Acta Materialia, Vol.58, 2014-2025, 2010
  • P. Qu, H. Toda, H. Zhang, L. Qian, M. Sakaguchi, M.Kobayashi,K. Uesugi, 3D observation and image-based finite element analyses of fatigue crack propagation in an Al-Mg-Si alloy, Advanced Materials Research, Vols. 89-91, 449-454, 2010
  • M. Kobayashi, H. Toda, K. Uesugi, Three-dimensional visualization and analysis of grain deformation by means of synchrotron radiation, Materials Science Forum, Vols. 638-642, 2523-2528, 2010
  • H. Zhang, P. C. Qu, Y. Sakaguchi, H. Toda, M. Kobayashi, K. Uesugi and Y. Suzuki, Three-dimensional characterization of fatigue crack propagation behavior in an aluminum alloy using high resolution X-ray microtomography, Materials Science Forum, Vols., 638-642, 378-383, 2010
  • 大語英之,戸田裕之,上杉健太朗,鈴木芳生,小林正和,5154アルミニウム合金の延性破壊における水素ミクロポアの成長挙動,軽金属,Vol.60, No.8, 409-410, 2010
  • 戸田裕之,小林正和,伊藤真也,中澤満,青木義満,堀川宏,鈴木聡,ミクロポアがアルミニウム合金ダイカストの強度・延性に及ぼす影響の統計的解析,鋳造工学, Vol.82, No.7, 427-432, 2010
  • 戸田裕之,小林正和,新原智晴,山田 徹,大場義夫,柿崎みな子,表面冷間加工処理を施したAC4Bアルミニウム合金鋳物の熱機械疲労特性,軽金属, Vol.60, No.4, 190-191, 2010

2009

  • 戸田裕之、本江真之、角海和宏、中山栄浩、小林正和、小林俊郎, Al-Mg-Si系合金の時効硬化挙動に及ぼす急速昇温の効果, 軽金属, 59(10),569-575, 2009
  • 増田翔太郎,戸田裕之,青山俊三,折井 晋,植田将志,小林正和, 熱処理したアルミニウム合金ダイカストで新たに見つかった鋳肌欠陥とその疲労特性への影響, 鋳造工学, 81(10),475-481, 2009
  • H. Toda, T. Hidaka, M. Kobayashi, K. Uesugi, A. Takeuchi, K. Horikawa, Growth behavior of hydrogen micropores in aluminum alloys, Acta Materialia, 57, 2277-2290, 2009
  • P. Qu, H. Toda, H. Zhang, Y. Sakaguchi, L. Qian, M. Kobayashi and K. Uesugi, Local crack driving force analysis of a fatigue crack by a microstructural tracking method , Scripta Materialia, 60,489-492, 2009
  • H. Toda, K. Minami, K. Koyama, K. Ichitani, M. Kobayashi, K. Uesugi, Y. Suzuki, Healing behavior of preexisting hydrogen micropores in aluminum alloys during plastic deformation, Acta Materialia, 57,4391-4403, 2009
  • 小林正和、戸田裕之、南恵介、森豊和、上杉健太朗、竹内晃久、鈴木芳生, 放射光を用いた投影およびイメージングCTによる2024アルミニウム合金中のミクロポアの3D観察, 軽金属, 59(1), 30-34, 2009
  • H. Zhang, H. Toda, P.C. Qu, Y. Sakaguchi, M. Kobayashi, K. Uesugi, Y. Suzuki, Three-dimensional fatigue crack growth behavior in an aluminum alloy investigated with in situ high-resolution synchrotron X-ray microtomography, Acta Materialia, 57(11), 3287-3300, 2009
  • H. Toda, T. Fukunaga and M. Kobayashi, Improvement of thermomechanical fatigue life in an age-hardened aluminum alloy, Scripta Materialia, Vol. 60, 385-387, 2009
  • M. Nakai, M. Niinomi, T. Akahori, N. Ohtsu, H. Nishimura, H. Toda, H. Fukui and M. Ogawa, Surface hardening of biomedical Ti-29Nb-13Ta-4.6Zr and Ti-6Al-4V ELI by gas nitriding, Materials Science and Engineering: A, 486(1-2), 193-201, 2008

2008

  • 戸田裕之、福永哲也、小林正和、上杉健太朗、小林俊郎、山田 徹、大場義夫、柿崎みな子, 表面冷間加工処理を施したAC4CHアルミニウム合金鋳物の熱機械疲労特性, 軽金属, Vol58(6), 236-241, 2008
  • 小林正和、藤滝幸太郎、戸田裕之、安井利明、福本昌宏、椿正己, 摩擦撹拌プロセスによる異種金属複合材料の創製, 軽金属, 58(10), 524-525, 2008
  • H. Toda, S. Yamamoto, M. Kobayashi and K. Uesugi, Direct measurement procedure for 3-D local crack driving force using synchrotron X-ray microtomography, Acta Materialia, 56,6027-6039, 2008
  • T. Nishimura, H. Toda, M. Kobayashi, T. Kobayashi, K. Uesugi and Y. Suzuki, Change in microstructure of Al-Si-Cu casting alloys during high-temperature solution treatment, International Jounal of Cast Metals Research, Vol.21,No.1-4,114-118, 2008
  • J.H.Kim,M.Niinomi,T.Akahori,H.Toda, Fatigue Properties bovine compact bones that have different microstructures, International Journal of Fatigue, 29(6),1039-1050, 2008
  • 日高達真、戸田裕之、小林正和、上杉健太朗、小林俊郎, 屈折コントラストイメージングによるAl-7%Si合金鋳物の延性破壊過程の3D観察, 軽金属, 58(2),58-64, 2008
  • 戸田裕之、福永哲也、小林正和、上杉健太朗、小林俊郎、山田 徹、大場義夫、柿崎みな子, 表面冷間加工処理を施したAC4CHアルミニウム合金鋳物の熱機械疲労特性, 軽金属, 58(6),236-241, 2008
  • L. Qian, H. Toda, K. Uesugi, M. Kobayashi and T. Kobayashi, Direct observation and image-based simulation of three-dimensional tortuous crack evolution inside opaque materials, Physical Review Letters, Vol.100(11),115505, 2008
  • L. Qian, H. Toda, K. Uesugi, T. Ohgaki, M. Kobayashi and T. Kobayashi, Three-dimensional visualization of ductile fracture in an Al-Si alloy by high resolution synchrotron X-ray microtomography, Materials Science and Engineering: A, Volumes 483-484,193-201, 2008
  • A. Weck, D.S. Wilkinson, E. Maire and H. Toda, Visualization by X-ray tomography of void growth and coalescence leading to fracture in model materials, Acta Materialia, Vol.56(12),2919-2928, 2008
  • M. Kobayashi, H. Toda, Y. Kawai, T. Ohgaki, K. Uesugi, D.S. Wilkinson, T. Kobayashi, Y. Aoki, M. Nakazawa, , High-density three-dimensional mapping of internal strain by tracking microstructural features, Acta Materialia, Vol.56(10),2167-2181, 2008
  • M. Nakai, M. Niinomi, T. Akahori, N. Ohtsu, H. Nishimura, H. Toda, H. Fukui, M. Ogawa, Hard-ceramic layer formed on Ti-29Nb-13Ta-4.6Zr and Ti-6Al-4V ELI during Gas Nitriding, Materials Science Forum, 561-565,1509-1512, 2007

2007

  • M. Toyoda, H. Toda, H. Ikuno, T. Kobayashi, M. Kobayashi, K. Matsuda, Preferential orientation of precipitates during thermo-mechanical cyclic loading in an aluminum alloy, Scripta Materialia, Vol.56,377-380, 2007
  • L. Li, H. Toda, T. Ohgaki, M. Kobayashi, T. Kobayashi, K. Uesugi and Y. Suzuki, Wavelet-based local region-of-interest reconstruction for synchrotron radiation X-ray microtomography, Journal of Applied Physics, Vol.102,114908-1-9, 2007
  • L. Qian, H. Toda, K. Uesugi, M. Kobayashi T. Kobayashi,, 3D Image-based Modeling of Ductile Fracture in an Aluminum Alloy Using Synchrotron X-ray CT Images , Materials Science Forum, Vol. 561-565,263-266, 2007
  • T. Ohgaki, Y. Takami, H. Toda, T. Kobayashi, Y. Suzuki, K. Uesugi, K. Makii, T. Takagi and Y. Aruga, Three-dimensional Zinc mapping inside aluminum foams using synchroteon X-ray microtomography, Materials Science Forum, Vol. 561-565,1677-1680, 2007
  • 中澤満、青木義満、小林正和、戸田裕之 , 材料内部の変形破壊特性評価のための3次元画像解析  , 電気学会論文誌C, 127(6),824-830, 2007
  • M. Kobayashi, H. Toda, T. Ohgaki, K. Uesugi, D.S. Wilkinson, T. Kobayashi and Y. Aoki, Three-dimensional measurement of local strain distribution by tracking microstructural features in high-resolution SR=CT image, Key Engineering Materials, 345-346,1153-1156, 2007
  • 仲井正昭、新家光雄、赤堀俊和、大津直史、西村英樹、戸田裕之、福井壽男、小川道治, ガス窒化処理による生体用Ti-29Nb-13Ta-4.6Zr合金およびTi-6Al-4V ELI合金表面の硬質皮膜生成に及ぼす合金元素の影響, 日本金属学会誌, 71(4),415-422, 2007
  • H. Zhang, H. Toda, H. Hara, M. Kobayashi, T. Kobayashi, D. Sugiyama and N. Kuroda, 3D visualization of interaction between fatigue crack and micropores in an aluminum alloy using synchrotron X-ray microtomography, Metallurgical and Materials Transactions A, 38A,1774-1785, 2007
  • 小林正和、戸田裕之、川井祐児、小林俊郎、上杉健太朗、David S. Wilkinson、Eric Maire、青木義満, 高分解能X線CTイメージ解析と特徴点追跡法による三次元ひずみ計測, 日本金属学会誌, 71(2),181-186, 2007
  • 戸田裕之、小林俊郎、小林正和、澤村純平、小宅勝, 異種金属切削粉からなる強加工in-situ複合材料のミクロ組織形成過程, 日本金属学会誌, 71(3),368-377, 2007
  • 庄山和輝、戸田裕之、大垣智巳、小林俊郎, 放射光X線CTによる発泡Al-Zn-Mg合金の微細構造での熱処理の影響評価, 鋳造工学, Vol79(2), 101-106, 2007
  • 庄山和輝、戸田裕之、大垣智巳、小林俊郎, 放射光X線CTによる発泡Al-Zn-Mg合金の微細構造での熱処理の影響評価, 鋳造工学誌, 79(2), 101-106, 2006

2006

  • T.Kobayashi and H.Toda, Strength and fracture of aluminium alloys, Materials Science Forum, 539-543,127-134, 2006
  • T.Ohgaki, H.Toda, K.Uesugi, T.Kobayashi, K.Makii, T.Takagi and Y.Aruga, Application of local tomography technique to high-resolution synchrotron X-ray imaging, Materials Science Forum, 539-543,287-292, 2006
  • M.Kobayashi, Y.Takayama, H.Kato, and H.Toda, In-situ SEM/EBSP analysis during annealing in a pure aluminum foil for capacitor, Materials Science Forum, 539-543,362-367, 2006
  • M.Kobayashi, H.Toda, T.Ohgaki, K.Uesugi, D.S.Wilkinson, T.Kobayashi, Y.Kawai and Y.Aoki, 3-D high-density strain mapping procedure based on high-resolution CT, Materials Science Forum, 539-543,2377-2382, 2006
  • M. Kobayashi, H. Toda, K. Uesugi, T. Ohgaki, T. Kobayashi, Y. Takayama, B.-G. Ahn, Preferential penetration path of gallium into grain boundary in practical aluminium alloy, Philosophical Magazine, 86(28),4351-4366, 2006
  • 金鐘憲,新家光雄,赤堀俊和,戸田裕之, ウシ緻密骨における疲労き裂の発生および進展挙動, 日本金属学会誌, 70(4),350-358, 2006
  • 赤堀俊和,新家光雄,野田篤史,戸田裕之,福井壽男,小川道治, 生体用Ti-29Nb-13Ta-4.6Zr合金の力学的特性に及ぼす時効処理の影響, 日本金属学会誌, 70(4),295-303, 2006
  • 赤堀俊和,新家光雄,小柳禎彦,春日敏宏,野田篤史,戸田裕之,福井壽男,小川道治, 生体活性化リン酸カルシウム結晶化ガラスコーティングした生体用Ti-29Nb-13Ta-4.6Zr合金の時効処理と力学的特性, 日本金属学会誌, 70(4),314-321, 2006
  • 新家光雄,赤堀俊和,戸田裕之,飯塚大亮,福井壽男,小川道治, 電気化学処理による生体用β型チタン合金の生体表面化成処理, 日本金属学会誌, 70(4),304-313, 2006
  • 向山友彦,新家光雄,戸田裕之,赤堀俊和,小林俊郎,山本 勇, アルミニウム合金展伸材の吸収エネルギーと破壊表面積に及ぼす負荷速度の影響, 軽金属, 56(1),15-20, 2006
  • T.Ohgaki, H.Toda, M.Kobayashi, K.Uesugi, T.Kobayashi, M.Niinomi, T.Akahori, K.Makii, Y.Aruga, In-situ high-resolution X-ray CT observation of compressive and damage behaviour of aluminium foams by local tomography technique, Advanced Engineering Materials, 8(6),473-475, 2006
  • T.Ohgaki, H.Toda, M.Kobayashi, K.Uesugi M.Niinomi, T.Akahori, T.Kobayashi, K.Makii and Y.Aruga, In-situ observations of compressive behaviour of aluminium foams by local tomography using high resolution X-ray, Philosophical Magazine A, 86(28),4417-4438, 2006
  • L.Qian, S.Nishido, H.Toda and T.Kobayashi, FEM modeling of crack propagation in a model multiphase alloy, Journal of Materials Science and Technology, 59-65, 2006
  • H.Toda, T.Ohgaki, K.Uesugi, M.Kobayashi, N.Kuroda, T.Kobayashi, M.Niinomi, T.Akahori, K.Makii and Y.Aruga, Quantitative assessment of microstructure and its effects on compression behaviour of aluminium foams via high-resolution synchrotron X-ray tomography, Metallurgical Materials Transactions. A, 37A(4),1211-1220, 2006
  • H.Toda, M.Takata, T.Ohgaki, M.Kobayashi, T.Kobayashi, K.Uesugi, Ko.Makii and Y.Aruga, 3-D Image-Based Mechanical Simulation of Aluminium Foams: Effects of Internal Microstructure, Advanced Engineering Materials, 8(6),459-467, 2006
  • H. Toda, M. Toyoda, T. Kobayashi, T. Akahori and M. Niinomi, Feasibility Study on Smart Coating for Failure Prevention under Thermo-Mechanical Fatigue Loading, Journal of Intelligent Material Systems and Structures, 17,1099-1103, 2006
  • A.Weck, D.Wilkinson, H.Toda and E.Maire, 2D and 3D visualization of ductile fracture, Advanced Engineering Materials, 8(6),469-472, 2006
  • 中澤満,青木義満,川井祐児,小林正和,戸田裕之, 材料内部の変形・破壊特性評価のための3次元画像解析 , ITE Technical Report, 30(17),21-24, 2006
  • 坂口信人、新家光雄、赤堀俊和、戸田裕之, 生体用Ti-30Nb-10Ta-5Zr合金の引張変形挙動解析, 日本金属学会誌, 70(1), 89-95, 2006
  • 坂口信人、新家光雄、赤堀俊和、戸田裕之, 生体用Ti-XNb-10Ta-5Zr合金の引張変形挙動解析, 日本金属学会誌, 70(7),572-578, 2006
  • L.Qian, H.Toda, S.Nishido, T.Kobayashi, Experimental and numerical investigations of the effects of the spatial distribution of α phase on fracture behavior in hypoeutectic Al-Si alloys, Acta Materialia, 54,4881-4893, 2006
  • H. Toda, K. Uesugi and A. Takeuchi, K. Minami, M. Kobayashi and T. Kobayashi, Three-dimensional observation of nanoscopic precipitates in an aluminium alloy by microtomography with Fresnel zone plate optics, Applied Physics Letter, 89(14),143112, 2006
  • H. Toda, K. Minami, M. Kobayashi, K. Uesugi, A. Takeuchi, T. Kobayashi, Observation of precipitates in Aluminum alloys by sub-micrometer resolution tomography using Fresnel zone plate, Materials Science Forum, 519-521,1361-1366, 2006
  • S. Yamamoto, H. Toda, L. Qian, T. Ohgaki, M. Kobayashi, T. Kobayashi and K. Uesugi, Assessment of damage and fracture behaviors in a cast aluminum alloy via in-situ synchrotron microtomography, Materials Science Forum, 519-521,1005-1010, 2006
  • 赤堀俊和,新家光雄,戸田裕之,山内鴻之祐,福井寿男,小川道治, β型チタン合金(TNTZ)線引き材の力学的特性と変形挙動, 日本金属学会誌, 69(7),530-537, 2005

2005

  • 赤堀俊和,新家光雄,大谷真史,戸田裕之,福井壽男,小川道治, 生体用Ti-29Nb-13Ta-4.6Zr合金の切欠き疲労特性, 軽金属, 55(11),575-581, 2005
  • 赤堀俊和,新家光雄,原田雅章,武田淳二,戸田裕之,桂成基,竹内力,福井寿男, 新しく設計した歯科用β型チタン合金の機械的性質と細胞毒性, 日本金属学会誌, 69(,1),96-102, 2005
  • 西戸誠志、Qian Lihe、豊橋技術科学大学生産システム工学系 戸田裕之、小林俊郎、新家光雄、赤堀俊和, Al-Siモデル合金のき裂伝播に及ぼすSi粒子の空間的分布の影響, 軽金属, 55(2),75-81, 2005
  • 武田淳仁,新家光雄,赤堀俊和,鈴木良樹,戸田裕之, 等軸および針状組織を有する高加工性チタン合金のミクロ組織とフレッティング疲労特性, 軽金属, 55(12),654-660, 2005
  • 武田淳仁,新家光雄,赤堀俊和,鈴木良樹,戸田裕之, 等軸および針状組織を有する高加工性チタン合金の接触面圧とフレッティング疲労特性, 軽金属, 55(12),661-667, 2005
  • 森田繁樹、小林俊郎、新家光雄、戸田裕之、赤堀俊和, 計装化シャルピー衝撃試験における荷重−変位曲線および吸収エネルギー値におよぼす衝撃刃先端曲率半径の影響, 鉄と鋼, 91(5),485-492, 2005
  • 森田繁樹、小林俊郎、新家光雄、戸田裕之、赤堀俊和, 計装化シャルピー衝撃試験における計測荷重に及ぼすハンマー形状および衝撃刃形状と材質の影響, 材料の科学と工学, 42(3),158-163, 2005
  • 村上哲也,戸田裕之,赤堀俊和,新家光雄,小林俊郎, CT試験片及び円周切欠付丸棒試験片を用いたHT780鋼の破壊靱性評価, 鉄と鋼, 91(4),415-420, 2005
  • 新家光雄,赤堀俊和,戸田裕之,春日敏宏, 生体用β型チタン合金表面にコーティングしたリン酸カルシウム結晶化ガラス層の形態, まてりあ, 43(,1),1034, 2005
  • 小林正和,上杉健太朗,大垣智巳,,小林俊郎,戸田裕之, 液体金属ドーピング法を用いた高分解能シンクロトロン放射光CTによる 粒界3次元ネットワーク構造の可視化, まてりあ, 44(12)959, 2005
  • 入之内豊、戸田裕之、酒井崇之、小林俊郎、王磊, AC4CHアルミニウム合金鋳物の高温溶体化処理による機械的性質の改善, 軽金属, 55(4),159-163, 2005
  • Y.L.Zhou, M.Niinomi, T.Akahori, H.Fukui, H.Toda, Corrosion resistance and biocompatibility of Ti-Ta alloys for biomedical applications, Materials Science and Engineering A, 398,28-36, 2005
  • T.Ohgaki,, H.Toda, I.Sinclair, J.-Y.Buffiere W.Ludwig and T.Kobayashi, Quantitative assessment of liquid Ga penetration into aluminium alloy by high-resolution X-ray tomography, Materials Science & Engineering. A, 406(1-2),261-267, 2005
  • T.Akahori, M.Niinomi,Y.Koyanagi, T.Kasuga,H.Toda,H.Fukui and M.Ogawa, Mechanical Properties of Biocompatible Beta-Type Titanium Alloy Coated with Calcium Phoshate Invert Glass-Ceramic Layer, Materials Transactions, 46(7),1564-1569, 2005
  • T.Akahori, M.Niinomi,H.Fukui, M.Ogawa and H.Toda, Improvement in fatigue characteristics of newly developed beta type titanium alloy for biomedical applications by thermo-mechanical treatments, Materials Science and Engineering C, 25(3),248-254, 2005
  • T. Murakami, H. Toda, T. Kobayashi, Effects of Temperature and Loading Rate on Fracture Toughness, Key Engineering Materials, 297-300,2397-2405, 2005
  • S.Nishido, M.Kaneso, T.Kobayashi and H.Toda, Role of Si particle damage on fatigue characteristics of cast Al-Si alloys, International journal of Cast Metals Research, 17(6),345-350, 2005
  • N.Sakaguchi, M.Niinomi, T.Akahori, J.Takeda and H. Toda, Effect of Ta content on mechanical properties of Ti-30Nb-XTa-5Zr, Materials Science and Engineering C, 25(3),370-376, 2005
  • N.Sakaguchi, M.Niinomi, T.Akahori, J.Takeda and H. Toda, Relationships between tensile deformation behaviors and microstructures of Ti-Nb-Ta-Zr system alloys, Materials Science and Engineering C, 25(3),363-369, 2005
  • M.Niinomi, T.Akahori, T.Takeuchi. S.Katsura, H.Fukui and H.Toda, Mechanical properties and cyto-toxity of newly designed beta type titanium alloys with low melting points for dental applications, Materials Science and Engineering C, 25(3),417-425, 2005
  • M.Niinomi, J.Takeda, T.Akahori, H.Fukui, M.Toyama and H.Toda, Effect of microstructure on tensile properties and static fracture toughness of Dental gold alloy, Materials Transactions, 46(4),1540-1544, 2005
  • L.Qian, H.Toda, K.Uesugi, T.Kobayashi, T.Ohgaki, and M.Kobayashi, Application of synchrotron X-ray microtomography to investigate ductile fracture in Al alloys, Applied Physics Letter, 87, 241907, 2005
  • L. Qian, H. Toda, S. Nishido, T. Akahori, M. Niinomi and T. Kobayashi, Numerical Simulation of Fracture of Model Al-Si Alloys, Metallurgical and Materials Transaction A, 36A,2979-2992, 2005
  • L. Qian, H. Toda, S. Morita, T. Kobayashi and Z.G. Wang, In-situ Observations of Fracture Processes in 0.6 μm and 9.5 μm SiCP/6061Al Composites, Materials Transactions, 46(,1),34-41, 2005
  • J.H.Kim, M.Niinomi, T.Akahori, J.Takeda and H.Toda, Effect of microstructure on fatigue strength of bovine compact bones, JSME International Journal Series A, Solid Mechanics and Material Engineering, 48(4),472-480, 2005
  • J.Ahn, H.Toda, M.Niinomi, and T.Kobayashi, True-3D strain mapping for assessment of material deformation by synchrotron X-ray microtomography, Review of Progress in Quantitative NDE, American Institute of Physics, Melville, NY, 24,1423-1430, 2005
  • H.Toda, T.Ohgaki, K.Uesugi, K.Makii, Y.Aruga, A. Toshikazu, M.Niinomi and T.Kobayashi, In-situ observation of fracture of aluminium foam using synchrotron X-ray microtomography, Key Engineering Materials, 297-300,1189-1195, 2005
  • H. Toda, J. Katano, T. Kobayashi, T. Akahori and M. Niinomi, Assessment of Thermo-Mechanical Fatigue Behaviors of Cast Al-Si Alloys by Experiments and Multi-Step Numerical Simulation, Materials Transactions, 46(,1),111-117, 2005
  • H. Toda, H. Mizutani, T. Akahori, M. Niinomi and T. Kobayashi, Image-based mechanical analysis of multifilamentary microstructure formation in Al-Fe heavily-deformed in-situ composites, Materials Transactions, 46(10),2229-2236, 2005
  • Gunawarman,M.Niinomi, T.Akahori,T.Souma, M.Ikeda,H.Toda,and K.Terashima, Fatigue Characteristics of Low Cost βTitanium Alloys for Healthcare and Medical Applications, Materials Transactions, 46(7),1570-1577, 2005
  • B.Gunawarman, M.Niinomi, T.Akahori, T.Souma, M.Ikeda and H.Toda, Mechanical properties and microstructures of low cost β titanium alloys for healthcare applications, Materials Science & Engineering. C, 25(3),304-311, 2005
  • B.Gunawarman, M.Niinomi, T.Akahori, J.Takeda and H.Toda, Mechanical properties of Ti-4.5Al-3V-2Mo-2Fe and possibility for healthcare applications, Materials Science & Engineering. C, 25(3),296-303, 2005
  • 戸田裕之,澤村純平,小林俊郎, 強加工in-situ複合材料技術を利用した金属切削粉のアップグレードリサイクル, 軽金属, 54(10),418-424, 2004

2004

  • 坂口信人,新家光雄,赤堀俊和,武田淳二,戸田裕之, Ti-Nb-Ta-Zr系合金のミクロ組織,引張特性および弾性率に及ぼすTaおよびZr添加量の影響, 日本金属学会誌, 68,(12)1076-1082, 2004
  • T. Masuda, H. Toda and T. Kobayashi, Notch effects on impact tensile properties in A6061-T6 aluminum alloy, Materials Science Forum, 449-452,137-140, 2004
  • K.H.Khor, H.Toda, J.-Y.Buffiere, W.Ludwig, H.S.Ubhi, P.J.Gregson and I.Sinclair, In-situ high resolution synchrotron X-ray tomography of crack closure micromechanisms, Journal of Physics: Condensed Matter, 16,S3511-S3515, 2004
  • H. Toda, I. Sinclair, J.Y. Buffiere, E. Maire, K. H. Khor, P. Gregson and T. Kobayashi, A 3D measurement procedure for internal local crack driving forces via synchrotron X-ray microtomography, Acta Materialia, 52(5),1305-1317, 2004
  • H. Toda and T. Kobayashi, Up-grade recycle by consolidating aluminium cutting chip under severe plastic deformation, Materials Science Forum, 449-452,333-336, 2004
  • H. Toda, T. Ohgaki, K. Uesugi, In-Situ High Resolution X-ray Tomography of Fracture Micromechanisms in Aluminium Foams, Research Frontiers, 133-134, 2004
  • J.J. Ahn, H. Toda, M. Niinomi, T. Kobayashi, K. Uesugi and T. Akahori, 3D strain mapping of small structures by synchrotron x-ray microtomography , JOM, vol56(11),308, 2004
  • Hayat, N., Kobayashi, T., Toda, H., Kojima, H., Grain size refinement through gas bubble stirring in AC4CH cast Aluminium alloy, International Journal of Cast Metals Research, 15(5),505-512, 2003

2003

  • 藤井靖充,戸田裕之,小林俊郎, 切削粉の強加工によるアルミニウム合金の創製とその力学的性質, 軽金属, 53(1),368-372, 2003
  • 増田智一,小林俊郎,戸田裕之,王磊, 5000系アルミニウム合金の動的変形挙動およびミクロ組織変化, 材料, 52(8),981-987, 2003
  • Q.Lihe, Z.G.Wang, H.Toda and T.Kobayashi, Effect of reinforcement volume fraction on the thermo-mechanical fatigue behavior of SiCw/6061 Al composites, Materials Science and Engineering A, 1A357(1-2), 240-247, 2003
  • K.H.Khor, M.Joyce, T.Connolley, H.Toda, I.Sinclair, E.Maire and J.-Y.Buffi?re, Synchrotron Microtomography of Fatigue Crack Closure, 2002 ESRF Scientific Highlights, 79-80, 2003
  • H. Toda, I. Sinclair, J.Y. Buffiere, E. Maire, T.Connolley, M.Joyce, K.H.Khor, P.Gregson, Assessment of fatigue crack closure phenomenon in damage tolerant aluminium alloy by in-situ high-resolution synchrotron X-ray microtomography, Philosophical Magazine A, 83(21),2429-2448, 2003
  • H. Miura, T.Sakai and H.Toda, Deformation and Fracture of Cu-SiO2 Bicrystals with [011] Twist Boundaries, Acta Materialia, 51,4707-4717, 2003
  • V.A. Mosneaga, T. Mizutani, T. Kobayashi, H. Toda, Impact toughness of weldments in Al-Mg-Si alloys, Materials Transactions, 43(6),1381-1389, 2002

2002

  • 金曽誠,西戸誠志,小林俊郎,戸田裕之, AC4CHアルミニウム合金鋳物における熱機械疲労特性および機械的性質に及ぼすミクロ組織の影響, 鋳造工学, 74(11), 699-705, 2002
  • 戸田裕之,小林俊郎,野口隆憲,杉山大吾,三浦博己,Nasir Hayat, 半凝固プロセスにより作製したアルミニウム合金鋳物の疲労特性, 鋳造工学, 74(2), 75-82, 2002
  • T.Kobayashi, H.Toda and T.Masuda, Analysis of test data obtained from charpy V and impact tensile test, From Charpy to Present Impact Testing, Elsevier, 173-180, 2002
  • Q.Lihe, Z.G.Wang, T.Kobayashi and H.Toda, Dynamic tensile deformation of SiCp/6061 Al composite Part 2 Strain rate sensitivity, Chinese Journal of Materials Research, 16(3),289-295, 2002
  • Q.Lihe, Z.G.Wang, T.Kobayashi and H.Toda, Dynamic tensile deformation of SiCp/6061 Al composite Part 1 Strain hardening characteristic, Chinese Journal of Materials Research, 16(3), 285-288, 2002
  • N.Hayat, H.Toda, T.Kobayashi, N.Wade, H.K.Ahn, C.H. Yu and H.Miura, Fatigue characteristics of AC4CH cast aluminium alloys fabricated by inclined cooling technique, International journal of Cast Metals Research, 14,293-301, 2002
  • N.Hayat, H.Toda, T.Kobayashi and N.Wade, Experimental investigations of fatigue characteristics of AC4CH cast aluminium alloys fabricated through rheocast and squeeze cast methods, Materials Science Forum, 396-402, 1353-1358, 2002
  • L. Qian, T. Kobayashi, H. Toda, T. Goda and Z. G. Wang, Fracture toughness of a 6061 Al matrix composite reinforced with fine SiC particles, Materials Transactions, JIM, 43(11),2838-2842, 2002
  • T. Masuda, T. Kobayashi, H. Toda and S. Morita, Strain rate dependency of impact tensile properties in various commercial aluminum alloys, Proceedings of ISAEM-2000, International Journal of Materials Product Technology, Special Issue, SPM1, , 823-828, 2001

2001

  • 神谷文彦,戸田裕之,小林俊郎,高巣正信,岡本直之, Al2O3-TiC複合材料の破壊靭性とその向上法の解析, 日本金属学会誌, 65(4),323-330, 2001
  • 森田繁樹,戸田裕之,高橋明宏,星山中,小林俊郎,永島洋, 6061アルミニウム合金の力学的性質に及ぼす溶体化処理後の冷却速度の影響, 軽金属, 51(6), 307-312, 2001
  • 戸田裕之,高橋明宏,小林俊郎, アルミニウム合金中の粗大な第二相粒子の損傷が力学的性質に与える影響の実験的評価, 軽金属, 51(7),361-368, 2001
  • 戸田裕之,植田毅,小林俊郎,合田孝志, 複合材料における組み合わせ応力下の界面はく離規準, 材料, 50(12),1375-1381, 2001
  • 戸田裕之,加賀城央,細井一良,小林俊郎,伊藤洋輔,東原隆,合田孝志, 中空粒子強化複合材料の各種力学的性質の評価およびその向上のための検討, 材料, 50(5),474-481, 2001
  • 戸田裕之, 水谷道, 高橋明宏, 小林俊郎,M.V.Alexandru, 6082アルミニウム合金溶接材の各部の破壊靱性, 軽金属, 51(3),163-168, 2001
  • 戸田裕之, 小林俊郎, 高橋明宏,星山中, 展伸用アルミニウム合金中の粗大な金属間化合物粒子の損傷によって誘発される破壊の計算機シミュレーション, 日本金属学会誌, 65(1),29-37, 2001
  • 戸田裕之, 小林俊郎, 星山中, 高橋明宏, 6061アルミニウム合金における粗大な金属間化合物粒子の損傷挙動のSEM内その場観察, 軽金属, 51(2),113-118, 2001
  • 彦坂武夫, 今井恒道, 小林俊郎,戸田裕之, SiC/6061アルミニウム合金複合材料の超塑性に及ぼす粒子径と粒子体積率の影響, 軽金属, 51(2),86-92, 2001
  • 彦坂武夫, 今井恒道, 小林俊郎,戸田裕之, 溶湯撹拌法で作製したSiC/7075アルミニウム合金複合材料の高速超塑性, 軽金属, 51(3),169-174, 2001
  • 川上正博,村山賢吾,柴田将寛,竹中俊英,戸田裕之, コークスのCOとの反応性と反応後強度の評価, 鉄と鋼, 87(5),252-258, 2001
  • 大迫和久,戸田裕之,小林俊郎, TiB粒子強化Ti基複合材料の強度の歪み速度依存性, 鉄と鋼, 87(9),619-622, 2001
  • V.A.Mosneaga, T.Mizutani, T.Kobayashi and H.Toda, Experimental and analytical investigations of fracture toughness in weldments of 6082 Al alloy, Materials Transactions, 42(11),2386-2391, 2001
  • V. A. Mosneaga, T. Kobayashi and H. Toda, Influence of ECAP and age hardening treatment in 6061 Al alloy, International Journal of Materials and Product Technology, 16(8),710-716, 2001
  • T.Kobayashi, H.Toda and T.Hashizume, Design and Evaluation of TiNi Particle Dispersed Titanium Matrix Composite, Transactions of the Materials Research Society of Japan, 26(1),247-250, 2001
  • L.Qian, Z.G.Wang, H.Toda and T.Kobayashi, Thermo - Mechanical Fatigue of SiC Whisker Reinforced 6061Al Composites ?T. Stress and Strain During Cycling, Acta Metallurgica Sinica, 37(11),1198-1202, 2001
  • L.Qian, Z.G.Wang, H.Toda and T.Kobayashi, Thermo - Mechanical Fatigue of SiC Whisker Reinforced 6061Al Composites II. Fatigue Life and Damage Mechanism, Acta Metallurgica Sinica, 37(11),1203-1207, 2001
  • L.Qian, T.Kobayashi, H.Toda and Z.G.Wang, Dynamic fracture toughness of 6061Al composites reinforced with SiC particulates, Materials Science and Engineering A, 318,189-196, 2001
  • 高橋明宏, 小林俊郎, 戸田裕之,水谷道, 5083アルミニウム合金O材の極低温から高温における動的破壊靱性, 軽金属, 50(8),386-391, 2000

2000

  • 小林俊郎, 大谷昌弘, 森田繁樹, 戸田裕之, 計装化シャルピー衝撃試験における計測荷重に及ぼす衝撃刃形状と歪ゲージ貼付位置の影響, 鉄と鋼, 86(9),25-31, 2000
  • L.Wang, T.Kobayashi, H.Toda, M.Hayakawa, Effect of loading velocity and testing temperature on the fracture toughness of a SiCw / 6061Al alloy composite, Materials Science and Engineering A, 280,214-219, 2000
  • L.Qian, Z.G.Wang, H.Toda, T.Kobayashi and Q.Yao, Thermo-Mechanical Fatigue of a SiC / 6061Al Composite, Materials Transactions, JIM, 41(6),651-655, 2000
  • L.Qian, Z.G.Wang, H.Toda and T.Kobayashi, High temperature low cycle fatigue and thermo-mechanical fatigue of a 6061Al reinforced with SiC, Materials Science and Engineering, A291,235-245, 2000
  • H.Toda, T.Kobayashi, A.Takahashi, Mechanical analysis of toughness degradation due to premature fracture of course inclusions in wrought aluminium alloys, Materials Science and Engineering A, 280,69-75, 2000
  • H. Fukumasu, T. Kobayashi, H. Toda and K. Shibue, Dynamic Fracture toughness of a Ti-45Al-1.6Mn Alloy at High Temperature, Metallurgical and Materials Transactions A, 31A(12),3053-3061, 2000
  • 高橋明宏, 小林俊郎, 戸田裕之, Al-Li系合金の破壊挙動に及ぼす介在物の影響のSEM内その場観察, 軽金属, 49(4),166-171, 1999

1999

  • 高橋明宏, 小林俊郎, 戸田裕之, 2091アルミニウム合金の層状割れ発生基準, 軽金属, 49(6),249-252, 1999
  • 河部昭雄, 押田篤, 小林俊郎, 戸田裕之, 溶湯攪拌法によるナノサイズSiC粒子のアルミニウム合金への複合化, 軽金属, 49(4),149-154, 1999
  • 彦坂武夫, 今井恒道, 小林俊郎, 戸田裕之, 溶湯撹拌法によるSiC/6061アルミニウム合金複合材料の超塑性に及ぼす圧廷加工の影響, 軽金属, 49(12),600-606, 1999
  • 小林俊郎,東原隆,山谷勇登,細井一良,戸田裕之, バイモーダルな粒子形状及びサイズ分布を有するシリカ粒子充填エポキシ樹脂の疲労特性, 材料科学, 36(6),320-326, 1999
  • 小林俊郎,東原隆,山谷勇登,細井一良,戸田裕之, シリカ粒子充填エポキシ樹脂の力学的特性に及ぼすゴム変性の影響, 材料, 48(12),1386-1392, 1999
  • 小林俊郎, 井上直也, 坂口明, 戸田裕之, 計装化シャルピー衝撃試験における荷重較正と試験片サイズの影響, 鉄と鋼, 85(1),78-83, 1999
  • 姚強, 小林俊郎, 戸田裕之, 北岡山治, ダイカストAl-Si-Cu 合金鋳物の疲労き裂伝播特性に及ぼすミクロ組織の影響, 軽金属, 49(9),443-449, 1999
  • L. Wang, T.Kobayashi, H.Toda and M.Hayakawa, Effects of Loading Velocity on Fracture Toughness of a SiCw/A6061 Composite at Elevated Temperatures, Materials Transactions, JIM, 40(10),1056-1062, 1999
  • H.Toda, T.Kobayashi and A.Takahashi, Micromechanism of Fracture in Wrought Aluminum Alloy Containing Coarse Inclusion Particles, Aluminum Transactions An International Journal, 1(1),109-116, 1999
  • A.Takahashi, T.Kobayashi and H.Toda, Initiation stress of delamination cracking in A2091 Al-Li alloy, International Journal of Materials and Product Technology, 14 (2,3,4),217-228, 1999
  • 戸田裕之, 小林俊郎, 田中幸哉,合田孝志, 強化材凝集部が導入された二相複合材料の高強度発現機構, 日本金属学会誌, 62(5),488-496, 1998

1998

  • H. Toda, T. Gouda, and T. Kobayashi, Finite element analysis of observed high strengthening in composites with regularly segregated microstructures, Materials Science and Technology, 14,925-932, 1998
  • 戸田裕之, 小林俊郎, 井上直也, アルミニウム合金基複合材料の変形特性に及ぼすマトリクス不均質ミクロ組織の影響の数値解析, 日本金属学会誌, 61(2),120-127, 1997

1997

  • 姚強, 小林俊郎, 戸田裕之, 堀久司, 鋳造鍛造アルミニウム合金鋳物の破壊靭性に及ぼすミクロ組織の影響, 軽金属, 47(11),613-619, 1997
  • P. L. Liu, Z. G. Wang, H. Toda and T. Kobayashi, Effect of cyclic stress on the high temperature creep behavior of SiCw/6061 Al composite, Scripta Metallurgica, 36,807-812, 1997
  • P. L. Liu, Z. G. Wang, H. Toda and T. Kobayashi, Effect of frequency on cyclic creep of SiCw/6061Al composite at high temperatures, Journal of Material Science Letters, 16,1603-1605, 1997
  • H. Toda and T. Kobayashi, Simulation of Crack Propagating in Discontinuously Reinforced Metal Matrix Composite, Metallurgical and Materials Transaction A, 28A(10),2149-2157, 1997
  • L.Wang, Z.M.Sun, T.Kobayashi, H.Toda and Z.G.Wang, Cyclic Deformation and Low Cycle Fatigue Behavior in a 6061Al/22vol% SiC Whisker Composite, Material Transactions,JIM, 37(4),762-768, 1996

1996

  • L.Wang, Z. M. Sun and T. Kobayashi and H. Toda, Cyclic Deformation and Low Cycle Fatigue Behavior in a SiCw/6061Al Composite at Elevated Temperature, Materials Transactions, JIM, 37(10),1561-1567, 1996
  • H. Toda and T. Kobayashi, Growth Behavior of Microstructurally Short Cracks in the 6061Aluminum Alloy with and without 22 Vol Pct SiC Whiskers, Metallurgical and Materials Transactions A, 27A, 2013-2021, 1996
  • 戸田裕之, き裂伝播シミュレーションによる複合材料の破壊特性の最適化, スズキ技報, 22,37-44, 1996
  • 戸田裕之, 小林俊郎, 和田義治, 井上直也, 破壊力学シミュレーションによる金属基複合材料の破壊じん性評価とミクロ組織制御法の提案, 日本金属学会誌, 59(2),198-205, 1995

1995

  • 戸田裕之, 小林俊郎, 和田義治, 短繊維または粒子で強化した金属基複合材料中を伝播するき裂の破壊力学シミュレーション, 日本金属学会誌, 59(1),94-102, 1995
  • 戸田裕之, 井上直也, 新村良子, 小林俊郎, ウィスカー強化MMCの変形特性に及ぼす強化材周囲におけるPFZ層の有限要素法解析, 日本金属学会誌, 59(9),925-932, 1995
  • 戸田裕之, 小林俊郎, 新家光雄, SiCウィスカー強化6061アルミ合金複合材料の破壊特性に及ぼす時効処理の影響, 日本金属学会誌, 58(4),468-475, 1994

1994

  • 戸田裕之, 小林俊郎, 新家光雄, 復元再時効処理によるSiCウィスカー強化アルミニウム合金複合材料のミクロ組織制御, 日本金属学会誌, 58(9),1086-1094, 1994
  • 戸田裕之, 小林俊郎, SiCウィスカー強化6061アルミニウム合金複合材料のミクロ組織的微小疲労き裂の伝播, 日本金属学会誌, 58(3), 337-345, 1994
  • 戸田裕之, SiCウィスカー強化6061合金複合材料の時効硬化特性, スズキ技報, 19,58-64, 1993

1993

  • 戸田裕之, 小林俊郎, 新家光雄, SiCウィスカー強化6061アルミニウム合金複合材料の時効析出挙動, 日本金属学会誌, 56(11),1303-1311, 1992

1992

  • 戸田裕之, 小林俊郎, SiCウィスカー強化6061アルミニウム合金複合材料の疲労き裂伝播特性, 日本金属学会誌, 56(11), 1312-1321, 1992
  • 小林俊郎, 岩成弘美, 袴田眞司, 新家光雄, 戸田裕之, SiC粒子強化6061アルミニウム合金複合材料の疲労き裂伝播特性, 日本金属学会誌, 55(1),72-78, 1991

1991